Full Description
View Full Description
Clean detail across the entire soundstage
The EXO 24 features a custom-designed Precision AirMotion Tweeter that captures every subtle high-frequency detail. This ultra-lightweight tweeter works alongside a guided waveguide to keep the sound consistent across a broad listening area. This is especially useful in larger control rooms or immersive setups where precise imaging is critical. Highs remain crisp and clear even at louder volumes, helping you spot fine elements in a mix without introducing listening fatigue.
The GDC waveguide improves spatial accuracy by shaping how sound is distributed in the room. This helps maintain a balanced stereo image, allowing you to work confidently on tasks like panning, vocal placement or surround mixing. The tweeter design also delivers strong transient response and low distortion, providing greater insight into the top end of your audio.
Strong low-end performance with smart control
The EXO 24 includes an 4” coated aluminium woofer designed for deep, accurate bass. It uses a lightweight cone with a resonance-damped dust cap and a carefully engineered magnet system. This combination ensures fast transient response and tight control across low and mid frequencies. You’ll get punchy kick drums, solid bass lines and consistent low-end definition even in dense mixes.
Optimised rear-facing reflex ports help extend the low-frequency range without introducing port noise. They also improve airflow, which reduces turbulence and enhances clarity in the lower spectrum. Onboard DSP ensures that all this output remains precise and calibrated, so you can rely on what you hear for every mix decision.
Easy adjustments without breaking your flow
A rear-mounted OLED screen paired with a SMART control knob gives you quick access to all major settings. You can tweak volume levels, input sources or room adaptation filters directly on the speaker. There’s no need to step away from your setup or interrupt your workflow. The clear display and responsive control make setup and adjustments simple and accurate.
On the front, a multi-colour illuminated logo shows system status in real time. It indicates overload protection, firmware updates and general operational readiness. The brightness is customisable to suit different studio environments. This small detail provides a useful visual cue while keeping the front panel clean and unobtrusive.
Remote-ready and built for immersive sound
The EXO 24 includes an Ethernet connection for use with the upcoming EVE Control software. This will allow full remote access to filters, EQ, delay and more. You’ll be able to adjust each monitor from your listening position, helping you get accurate speaker placement and room tuning in surround or immersive systems. No extra tools or interfaces are required.
The speaker’s enclosure is designed with low-diffraction edges to reduce reflections and preserve a clean, natural soundstage. Four M6 mounting points allow for flexible positioning, which is particularly useful in immersive rigs. Wake-on-signal ensures the system is ready when you are, improving energy efficiency without adding friction to your daily workflow.
Features
- 2-way monitor with 4" CAL woofer and EXO Precision AirMotion Tweeter for ultra-deep bass and detailed highs
- Advanced GDC Waveguide provides wide sweet spot and stable imaging, ideal for immersive formats like Dolby Atmos
- Low Diffraction Enclosure (LDE) with optimized rear bass reflex ports ensures accurate soundstage and minimized port noise
- Rear-mounted OLED display with SMART Control Knob allows intuitive adjustment of output level, EQ, delay, and input selection
- Ethernet-enabled for integration with upcoming EVE Control Software, enabling room calibration and real-time multi-monitor tuning
- Wake-on-Signal feature powers monitors automatically when audio is detected
- Four M6 mounting points simplify installation in complex or overhead setups
- Integrated DSP provides precision tuning, high SPL handling, and future-proof firmware updates
- Customizable illuminated front logo indicates system status and can be dimmed to suit the environment
- Engineered for professional mixing, mastering, and immersive audio production with precise spatial accuracy
Specifications
- General :
- Dimensions (mm): 195 × 284 × 230
- Dimensions (inch): 7.6 × 11.2 × 9.1
- Weight: 5.35 kg / 11.8 lb
- Output Power Per Speaker: 280 W
- Tweeter:
- Model: Precision AirMotion Tweeter (PAMT)
- Waveguide Technology: Guided Directivity Control (GDC)
- Output Power: 140 W / 1
- Woofer:
- Woofer Diameter: 5"
- Diaphragm Material: Coated Aluminum
- Voice Coil: Air Stream Optimized Voice Coil Design
- Output Power: 140 W / 1
- Acoustics:
- Frequency Range (-3 dB at 1 m full space): 44 Hz – 24 kHz
- Max. SPL (Full Space) > 100 Hz: 110 dB
- Max. SPL (Half Space) > 100 Hz: 116 dB
- Cross-Over Frequency: 2200 Hz
- Features:
- Protection Limiter: Yes
- Wake-on-LAN: Yes
- Wake-on-Signal: Yes
- Automatic Standby Mode: Yes (Adjustable)
- Status LED: Yes (Shows 8 Different States, e.g. Signal Overload)
- Mounting Point: Bottom Side Mounting Hole Pattern Of 50.8 × 107.9 mm (M6)
- User Interface: Rear OLED Display With SMART Control Knob
- Adjustable Settings:
- Volume: -∞ To +10 dB
- High-Shelf Filter: -5 dB To +3 dB (> 3 kHz)
- Mid EQ: -3 dB To +3 dB (3.2 kHz)
- Desk Filter Cut: -5 dB To 0 dB (550 Hz)
- Low-Shelf Filter: -5 dB To +3 dB (< 300 Hz)
- Max. Input Level: -10 dBV (max. 16.5 dBu) / +4 dBu (max. 20 dBu)
- Input Select: Balanced, Unbalanced, S/PDIF L/R/Mono
- LED Brightness: Continuously Dimmable From 0 To 100
- IP Address Configuration: Manual / Automatic (DHCP)
- Standby Mode: 15 min / 30 min / 60 min / Off
- Connections:
- Balanced XLR: Analog Signal Input
- Unbalanced RCA In: Analog Signal Input
- S/PDIF Digital: Digital Signal In-/Output
- LAN: Ethernet And Software Access
- Power Consumption:
- Standby: < 1 W
- Idle: 7 W
- Peak: 400 W
- Product Code: EXO-25
